WillHave you checked in with Dynon Support?might be worth an email or t/cFred
> On Aug 8, 2021, at 11:42 AM, William Daniell <wdaniell.longport@gmail.com>
> wrote:
>
> Following on my post of about month ago. I changed the sender for a new vdo
but sadly the result is the same. My oil pressure increases with
altitude...50psi
at 29"map at sea level, 55-57psi at 5000' 29"map.
>
> At low rpm the reading jumps around 45-55psi and then settles down once rpm is
increased.
>
> All other temps etc are green and stable: cht, oil temp, egt. And the engine
is apparently running fine..smooth and the isual amount of power.
>
> I cleaned out the oil tank about 20 hours ago and purged as required.
>
> The sensor is a new vdo and I have dynon skyview. 325 hours on the engine.
>
> Any bright ideas?
>
> The oil pressure ball/spring perhaps?
>
> Thanks
> Will
>
> William Daniell
> +1 786 878 0246
|