Following on my post of about month ago. I changed the sender for a new
vdo but sadly the result is the same. My oil pressure increases with
altitude...50psi at 29"map at sea level, 55-57psi at 5000' 29"map.
At low rpm the reading jumps around 45-55psi and then settles down once rpm
is increased.
All other temps etc are green and stable: cht, oil temp, egt. And the
engine is apparently running fine..smooth and the isual amount of power.
I cleaned out the oil tank about 20 hours ago and purged as required.
The sensor is a new vdo and I have dynon skyview. 325 hours on the engine.
Any bright ideas?
The oil pressure ball/spring perhaps?
Thanks
Will
William Daniell
+1 786 878 0246
|