Coolio.. will order. Many Thx!
PeteZ
> On Nov 20, 2021, at 12:10 AM, Karl Heindl <kheindl@msn.com> wrote:
>
> =EF=BB
> the springs may look short, but the hooks pull out to a long reach and 110
mm would be no problem. They were the original supply from Europa.
> From: owner-europa-list-server@matronics.com <owner-europa-list-server@mat
ronics.com> on behalf of Pete Zut <peterz@zutrasoft.com>
> Sent: 20 November 2021 00:41
> To: europa-list <europa-list@matronics.com>
> Subject: Re: Europa-List: Re : Exhaust springs source
>
> indeed! thx! .... but alas there have been reports of folks saying they a
re too short (my tabs are 110mm apart).... they must be different from what I
have on currently.
>
> I've ordered the Akrapovic Exhaust Springs (canadian site).... fingers x'd
:-)
>
> Cheers!
> Pete
>
> On Fri, Nov 19, 2021 at 3:42 PM Karl Heindl <kheindl@msn.com> wrote:
> I think this is what you are looking fpr ---
>
> https://www.demon-tweeks.com/uk/autogem-exhaust-spring-aglsc62/
>
> Buy Autogem Exhaust Spring - SC62 | Demon Tweeks
> These Exhaust Springs are 90mm in length and come equipped with both hooks
and loops at either end. They are ideal for attaching a wide range of silen
cers and underbody mounts and are finished in a coated alloy which enables t
hem to be resistant to corrosion.Sold individually.
> www.demon-tweeks.com
>
> From: owner-europa-list-server@matronics.com <owner-europa-list-server@mat
ronics.com> on behalf of Pete Zut <peterz@zutrasoft.com>
> Sent: 19 November 2021 17:16
> To: europa-list <europa-list@matronics.com>
> Subject: Re: Europa-List: Re : Exhaust springs source
>
> Hi John, yip always check there first (they have gotten a good chunk of my
paycheck over the years lol). Sadly, too short.
>
> Cheers
>
> On Fri., Nov. 19, 2021, 12:10 p.m. John Wigney, <johnwigney@windstream.net
> wrote:
> Hi Pete,
>
> See https://www.aircraftspruce.com/catalog/eppages/gplssexhaustspring.php?
clickkey=17488 $4.40 each
>
> Cheers, John
>
> From: Pete <peterz@zutrasoft.com>
> Subject: Europa-List: Exhaust springs source?
>
> My fine classic was missing one of its exhaust springs, and ive been havin
g a
> hard time sourcing (been using regular springs as a stop gap).
>
> Any suggestions?
>
> Thx!
>
> Pic is what i=99m looking for.
|