Re: Bubble in Fiberglass

[Gerry Cole <gccole13@cwcom.net>]

Jim,
I don't consider myself "on the board" but you can fill bubbles by
injecting resin using a medical syringe and needle. You need the larger
gauge needles - as used by doctors on those they don't like or by vets.
Drill a 1/16 dia hole at each end of the bubble and the air is expelled
---From one end as the resin is injected at the other end. I've had to do
this a couple of times inspite of taking great care not to get bubbles.
Gerry (121)