Hi Paul,
I see Andy has contacted you. The measurements in my manual were
9mm short for the pushrods, which I had manufactured by a metal
working company. To correct the problem I had to spend some more
money and get a new set of longer shootbolts.
The mention in the newsletter is not really enough as it is easily
overlooked, and there should have been an updated page sent out.
I believe the manual is now updated (April 2001).
Cheers, Karl Heindl
From: "Paul Stewart" <paul-d.stewart@virgin.net>
>Subject: Re: Door latch push rods
>Date: Tue, 21 Jan 2003 07:51:00 -0000
>
>Have just spent hours cutting filing and drilling the door latch push rods,
>according to the instructions in my build manual. Now discover there are
>amended dimensions, and my push rods are 4mm too short. Before either
>fitting them or throwing them away to start again, any one done the same
>and
>what were the consequenses if any.
>
>Regards
>
>Paul Stewart #432
>
>
|