europa-list
[Top] [All Lists]

RE: Europa-List: Subcontractor lists?

Subject: RE: Europa-List: Subcontractor lists?
From: Ken Stribling <ken@striblingranch.com>
Date: Tue, 3 Aug 2004 12:11:25

IF you find out the list off the board could you forward it my way I am
missing windscreens, doors and cowlings. I presume that motor mount and
FWF parts would come from rotex and airmaster.

Ken Stribling
Ken@striblingranch.com

-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of rlborger
Subject: Europa-List: Subcontractor lists?


Europaphiles,

Does anyone have a list of the subcontractors (U.S., U.K., E.U.) that 
Europa used?  Nuts, bolts, screws, bearing, rod-ends and all that 
assorted hardware is available through companies like ACS, Wickes and 
many others.  Landing gear structure, engine mounts, wings, cockpit 
modules, etc can only be obtained from those who have the needed 
tooling.

Would there be any possibility that an individual or group of 
individuals (through The Europa Club, for instance) could approach the 
subcontractors to obtain needed parts and/or spares for their kits?

For instance, I have not received my plexi windscreens.  I know there 
was a U.S. company that produced them for Europa U.S.  If the name and 
contact information for the provider were known, I could contact them 
directly to request a set of windscreens.    Or, if it is not feasible 
for them to produce a one-off, I could find out what a minimum product 
run would be and I could locate others who need windscreens and perhaps 
we could assemble a minimum order.

Perhaps some of the Europa folks could assemble this information for us.

Just some ideas.

Good building and great flying,
Bob Borger
Europa Kit #A221 N914XL, XS Mono, 914, Airmaster C/S
http://forum.okhuijsen.org/N914XL
(75%) tail kit done, wings closed, cockpit module installed, pitch 
system in, landing gear frame in, rudder system in, outrigger mod in, 
Fuselage Top on, lift/drag/flap pins in, wing incidence set. Working in 
- 24 Instrument Panel, 25 Electrical, 27 Setting Wings, 29 Main Gear, 
30 Fuel System, 32 Tail, 34 Door Latches & 35 Doors.
3705 Lynchburg Dr.
Corinth, TX  76208
Home:  940-497-2123
Cel:  817-992-1117


==
==
==
==




<Prev in Thread] Current Thread [Next in Thread>