Hi Terry,
You are right, the slot does come very close to the edge. I was concerned
about this too but I cut the slot as directed but didn't take it too far
back until I installed the lever and then extended just enough to give full
travel to the said lever.
When the plate was profiled, I let it overhang the tunnel by about 3 mm all
the way along and will fit the carpet to the underside of it (well, that's
the plan !)
There is about 5-6mm of metal at the rear edge of the plate now but it
certainly looks OK.
Hope this helps.
Cheers,
Ron Jones. (No. 359XS)
|