Re: Front Bearing setup

Subject:	Re: Front Bearing setup
From:	Graham Singleton <grasingleton@avnet.co.uk>
Date:	Wed, 15 Nov 2000 23:41:49

>We tested a number of lubricants on our Tufnol bearings not so long ago.
>
>Our choice of lubricants would be as follows
>
>(1) WD40
>(2) PTFE spray
>(3) Light Oil

I'm not keen on WD40 it does not contain much lubricant. Have you tried 
LPS1 or 2, or ACF50 a US equivalent?
Graham

<Prev in Thread]	Current Thread	[Next in Thread>
Re: Front Bearing setup, (continued) Re: Front Bearing setup, Paul & Liz Atkinson RE: Front Bearing setup, Bob . Harrison RE: Front Bearing setup, Tony Krzyzewski Re: Front Bearing setup, Tony Renshaw Re: Front Bearing setup, Brian Rauchfuss - PCD Re: Front Bearing setup, J van Heeswijk Re: Front Bearing setup, Tom & Cathy Friedland Re: Front Bearing setup, ami mcfadyean Re: Front Bearing setup, Carl Pattinson Re: Front Bearing setup, Carl Pattinson Re: Front Bearing setup, Graham Singleton <= Re: Front Bearing setup, Miles McCallum RE: Front Bearing setup, Roger Sheridan RE: Front Bearing setup, Robert Berube Re: Front Bearing setup, Fred Fillinger Re: Front Bearing setup, Grahamclk RE: Front Bearing setup, Robert Berube Re: Front Bearing setup, Fred Fillinger

Previous by Date:	Front Bearing.., Fergus Kyle
Next by Date:	Re: Re: Bob Archer - an endorsement, Fred Fillinger
Previous by Thread:	Re: Front Bearing setup, Carl Pattinson
Next by Thread:	Re: Front Bearing setup, Miles McCallum
Indexes:	[Date] [Thread] [Top] [All Lists]