Cheers,
I agree with the 'below'. I bought a German flex drive (1/4") with a
soft handle of rubber. I cut one side of it done to give 1/2" clearance for
the W18 which made it a superb job, and plan to use that. Cost $20 and have
used it many times already (when the drill itself was unwieldy).
Ferg A064
----- Original Message -----
From: jronjones <jronjones@msn.com>
Subject: Re: Attaching Landing gear mounting frame
> I agree. I used the Black & Decker flex. drive which sounds very similar
to
> the one described - similar in price too. The rigid handle, though, can
be
> levered back from the chuck to allow a very tight bend where its needed
> most.
> The small chuck makes it ideal when you come to drill the wing fixings
> (W18's) for the flap hinge brackets as they are VERY close to the
under-side
> of the wing !
> Regards,
> Ron Jones. XS 359. G-RJWX
>
>
|