>I found the same (7 plies needed and a longer bolt) -
the key thing is to ensure the vertical dimension from
fuselage to spring end is accurate otherwise the deck
angle will be wrong.
Regards
Roger Mills
G-BVUV
Hey All,
>
>In the process of setting up my tailwheel spring/arm
and have a question.
>
>I've set up per manual - 235mm below bottom of
fuselage, my hole through the
>sternpost is in the right place (1"/25mm above fuse
skin), and spring tang
>hole is almost exactly at the specified distance from
sternpost front face.
>
>Manual suggests you will need "about 5" 3mm ply/2
ply bid layers to build up
>the mounting pad, leaving some space for mounting
plate. My calculations
>show that I will need almost twice that. Probably not a
big issue but just
>curious if anyone else has run into the same.
>
>Emmet Welch
>A141 Mono XS
>
>____________________________________________________
__________________
>The Europa List is supported by Aviators Network UK -
info@avnet.co.uk
>
>
|