In a message dated 3/12/01 4:30:14 PM Eastern Standard Time,
grasingleton@avnet.co.uk writes:
<<
I would Redux bond it into the bottom, then cleco the top back on for cure,
>>
Hi All,
Graham is right. Thinking back I did remove the clecos from the sternpost,
redux it then went right back into the (tight fitting) holes with oiled
clecos(so the redux won't bond them) to hold it til cure. I assembled
everything as Graham described til it was cured. Sorry for the lapse. I need
a memory upgrade. ;)
Troy
|