Steve:
<<1) Rudder cables under theintermediate bulkhead ('D' shape) - do they go
inboard
or outboard of the plywood supports? >>
Line them up with whatever end fitting you are using. eg t/plane bulkhead
bellcrank(Graham
Singleton) or rudder bellcrank(europa) and see which requires the
least deflection. Mine went just outboard of the pushrod support b/h, and I
slipped
some nylaflow tubing over just to make sure there was no contact
<<2) Tailplane mass balance weights - how much metal has anyone had to remove
and how? Thanks in anticipation Steve Pitt #403 >>
None removed, they can be slid slightly(!)so I suspect (!!) for a bit of
adjustment.
None removed off 'UM, you know how she flies...
chus,
dave
g-bxum
|