Kevin:
I just recently accomplished this. I went to the Home Depot and obtained a
length of wooden dowel, I believe it was 3/8 dia. They have all different
sizes so pick what ever you think is stiff enough. I fiberglassed two of
these in underneath the cockpit of the proper length. These will stay
there. It set the distance and added a good degree of stiffness to the
assembly during the many rotations of the unit on the saw horses.
Steve Hagar
A143
Mesa, AZ
> [Original Message]
> From: Kevin Klinefelter <kevann@gte.net>
> Date: 2/7/02 10:14:37 AM
> Subject: Cockpit Module
>
> HI all, I'm trying to figure a way of insuring the 323mm spacing between
> the bottom of the seat back and the baggage bay front bulkhead when
bonding
> the module in place. It was held to the dimension when the fuel tank went
> in. There must be an obvious and easy way that I am not seeing.
> Thanks, Kevin A211
>
--- Steve Hagar
--- hagargs@earthlink.net
|