Hi Jeremy,
we replaced our hinge pins with teflon
tubing and 1/16" stainless wire, which
can be bent with needle nose pliers.
This arrangement gets rid of slop
and is self lubricating.
regards,
Terry Seaver
jeremycrdavey@btinternet.com wrote:
> Has anyone out there got a neat trick for bending the hinge pins? They're so
> stiff I'm rather nervous of bending or damaging the hinge as well, and the
> only
> tool I've found that makes any impact on the pins is a large hammer.
>
> Regards,
> Jeremy
>
> Jeremy Davey
> Europa XS monowheel 537M
>
|