Simon
I have worked on building two Europas now. I had to look in the book to see
what your were asking about. I don't know !
I did use a 8 mm tap on the wing root for the pins. I also found a 10-32
handy to clean out threads after I got epoxy in a bolt hole. ( be careful
not to go all the way in and make the hole too big)
(Andy: You might look at page 1-4 in the build manual and see if there is
and error there.)
Cliff Shaw
1041 Euclid ave.
Edmonds WA 98020
(425) 776-5555
N229WC "Wile E Coyote"
----- Original Message -----
From: "Simon Smith" <jodel@nildram.co.uk>
Subject: Europa-List: Required tools
>
> Hi all,
>
> To save me searching through the entire manual, can someone tell me
> where the 5mmx0.8mm and 12mmx1.75mm taps are required?
>
> Ta muchas
>
> Simon.
>
>
|