Help!
The spring mechanism in one of my pip-pins for my Europa Classic tailplane came
apart when I was trying to pull the pin out. Although I've now got the pin out
it is clearly no use and needs replacing. New ones appear to be massively
expensive
(>50GB pounds each).
Does anyone who has drilled out their torque tubes to take the new, upgraded,
larger
diameter pip-pins have an old, smaller diameter one to spare?
Yours hopefully
David
GBWJH
Visit SP at stand J06/L01 at the JEC Composites Show, Paris, 1st-3rd April 2003
**********************************************************************************************
All sales of goods are subject to the terms and conditions of sale (the
Conditions)
of SP Systems (the Company) which are available on request from the Company
or may be viewed on our Website (http://www.spsystems.com).
Any advice given by the Company in connection with the sale of goods is given
in good faith but the company only warrants that advice in writing is given with
reasonable skill and care. All advice is otherwise given subject to the
Conditions.
The contents of this message and any attachments are confidential and
are intended solely for the attention and use of the addressee only.
Information contained in this message may be subject to legal,
professional or other privilege or may otherwise be protected by other
legal rules. This message should not be copied or forwarded to any other
person without the express permission of the sender. If you are not the
intended recipient you are not authorised to disclose, copy, distribute
or retain this message or any part of it.
|