dAVID,
I have one, because of upgrading. Jenny comes over this week.
Let me know.
Ferg
----- Original Message -----
From: "Cripps, David" <david.cripps@spsystems.com>
Subject: Europa-List: Pip-pin wanted
<david.cripps@spsystems.com>
>
> Help!
>
> The spring mechanism in one of my pip-pins for my Europa Classic tailplane
came apart when I was trying to pull the pin out. Although I've now got the
pin out it is clearly no use and needs replacing. New ones appear to be
massively expensive (>50GB pounds each).
>
> Does anyone who has drilled out their torque tubes to take the new,
upgraded, larger diameter pip-pins have an old, smaller diameter one to
spare?
>
> Yours hopefully
>
> David
> GBWJH
>
>
> Visit SP at stand J06/L01 at the JEC Composites Show, Paris, 1st-3rd April
2003
>
>
****************************************************************************
******************
> All sales of goods are subject to the terms and conditions of sale (the
Conditions)
> of SP Systems (the Company) which are available on request from the
Company
> or may be viewed on our Website (http://www.spsystems.com).
>
> Any advice given by the Company in connection with the sale of goods is
given
> in good faith but the company only warrants that advice in writing is
given with
> reasonable skill and care. All advice is otherwise given subject to the
Conditions.
>
> The contents of this message and any attachments are confidential and
> are intended solely for the attention and use of the addressee only.
> Information contained in this message may be subject to legal,
> professional or other privilege or may otherwise be protected by other
> legal rules. This message should not be copied or forwarded to any other
> person without the express permission of the sender. If you are not the
> intended recipient you are not authorised to disclose, copy, distribute
> or retain this message or any part of it.
>
>
|