Hi Neville
OK, you are the expert, and if you say it is necessary to trowel on up to a
1/4 inch of filler, that's how I'll do it.
But I would like to understand why. What is the point of putting on such a
thick layer of Expancell if you are going to sand nearly all of it off?
Regards
John Heykoop
XS mono G-JHKP, #536
In a message dated 11/13/03 3:36:55 PM GMT Standard Time,
Neville@europa-aircraft.com writes:
> Trowel on the Expancell, trying not to get any air trapped under, heavy
> pressure with the trowel will normally ensure this. Fair in the filler as best
> you can, but leave it well proud, by up to 1/4'', YES 1/4 OF AN INCH !
|