Duncan,
The bearings Kingsley Hurst knocked out the other night, easily. He worked
---From the opposite side and just tapped them out as I recall him saying.
Message below pasted for your interest from a fellow at Spruce.
Reg
Tony Renshaw
From: "Craig Johnson" <craigjohnson@aircraftspruce.com>
Subject: Re: Product Query
Date: Wed, 7 Apr 2004 10:48:24 -0700
Dear Tony
Yes the 06-00060 is for the 06-03500 and 06-03600 tailwheels.
These are sealed roller bearings and have no flange.
they are designed to replace the bushing type bearings are supplied
with the tailwheels. These do not have a flange either.
There is no other hardware required to hold them in place.
The bearing manufacturer is by JAF/KSK located in Japan.
Regards
Craig Johnson
Aircraft Spruce Tech Support
At 08:54 AM 4/18/2004, you wrote:
><ami@mcfadyean.freeserve.co.uk>
>
>Has anyone tried to replace the bearings to the solid XS-style tailwheel (ie
>without replacing the whole wheel asembly). How easily do the old bearings
>come out and is there a standard part that can replace them?
>
>Duncan McF.
>
>
|