Paul:
The easiest thing to do is to take your old one and measure it up to make a
drawing or sketch, and give to a machinest. It looks like a prime candidate
to be turned from a piece of 1/4" aluminum bar stock. Mine busted also and
that's what I'm planning on doing.
Steve
A143 Mesa, AZ
> [Original Message]
> From: Paul Boulet <possibletodo@YAHOO.COM>
> To: <europa-list@matronics.com>
> Date: 7/18/04 5:46:15 PM
> Subject: Europa-List: static port problems
>
>
> Hi All;
> I searched archives for text on static port problems and didn't find much
helpful stuff. Mine too broke off and I'm getting erroneous readings of
airspeed and altitude. I tried ordering another couple of them from the
Lakeland, Florida office but they told me they had no idea when they might
get them in.
>
> Does anyone have a good alternative or other ideas to get me back in the
air? This is very frustrating
>
> Paul Boulet, N914PB
> Malibu, CA
> Still need to fly the 40 hours off
>
>
|