sign me up!
Paul Boulet, N914PB
N914RB <n914rb@earthlink.net> wrote:
I've got a guy here in Tucson that could probably do just that if anybody's
game.
Dan
----- Original Message -----
From: "Steve Hagar"
Subject: RE: Europa-List: static port problems
>
> Paul:
>
> The easiest thing to do is to take your old one and measure it up to make
a
> drawing or sketch, and give to a machinest. It looks like a prime
candidate
> to be turned from a piece of 1/4" aluminum bar stock. Mine busted also and
> that's what I'm planning on doing.
>
> Steve
> A143 Mesa, AZ
>
>
> > [Original Message]
> > From: Paul Boulet
> > To:
> > Date: 7/18/04 5:46:15 PM
> > Subject: Europa-List: static port problems
> >
> >
> > Hi All;
> > I searched archives for text on static port problems and didn't find
much
> helpful stuff. Mine too broke off and I'm getting erroneous readings of
> airspeed and altitude. I tried ordering another couple of them from the
> Lakeland, Florida office but they told me they had no idea when they might
> get them in.
> >
> > Does anyone have a good alternative or other ideas to get me back in the
> air? This is very frustrating
> >
> > Paul Boulet, N914PB
> > Malibu, CA
> > Still need to fly the 40 hours off
> >
> >
>
>
|