Thanks Dan. I ordered two more direct from UK so they should be here in just a
week or so when I'll forward one on to you. It's getting exciting!
Paul
N914RB <N914RB@earthlink.net> wrote:
Only problem is I just sent you (went out yesterday to Rob) my part, so
it'll have to wait until you're through with it or if someone has a spare
they can send to me so I can see if it can be copied.
Dan
N914RB
Tucson, AZ
----- Original Message -----
From: "Paul Boulet"
Subject: Re: Europa-List: static port problems
>
> sign me up!
> Paul Boulet, N914PB
>
> N914RB wrote:
>
> I've got a guy here in Tucson that could probably do just that if
anybody's
> game.
> Dan
>
> ----- Original Message -----
> From: "Steve Hagar"
> To:
> Subject: RE: Europa-List: static port problems
>
>
> >
> > Paul:
> >
> > The easiest thing to do is to take your old one and measure it up to
make
> a
> > drawing or sketch, and give to a machinest. It looks like a prime
> candidate
> > to be turned from a piece of 1/4" aluminum bar stock. Mine busted also
and
> > that's what I'm planning on doing.
> >
> > Steve
> > A143 Mesa, AZ
> >
> >
> > > [Original Message]
> > > From: Paul Boulet
>
> > > To:
> > > Date: 7/18/04 5:46:15 PM
> > > Subject: Europa-List: static port problems
> > >
>
> > >
> > > Hi All;
> > > I searched archives for text on static port problems and didn't find
> much
> > helpful stuff. Mine too broke off and I'm getting erroneous readings of
> > airspeed and altitude. I tried ordering another couple of them from the
> > Lakeland, Florida office but they told me they had no idea when they
might
> > get them in.
> > >
> > > Does anyone have a good alternative or other ideas to get me back in
the
> > air? This is very frustrating
> > >
> > > Paul Boulet, N914PB
> > > Malibu, CA
> > > Still need to fly the 40 hours off
> > >
> > >
> >
> >
>
>
|