Hi Brian,
my bearings outside faces are about 5 mm (or 3/8 of an inch) proud of the
outer surface. My total measurement from outside to outside face of the
bearings are 267 mm. They are for sure not centered in the hole of the
fuselage.
Michael Grass
A266 Trigear
Detroit, Michigan
----- Original Message -----
From: <EuropaXSA276@aol.com>
Subject: Re: Europa-List: RE: TP11 Torque tube bearings
>
> In a message dated 1/2/2005 9:17:51 PM Central Standard Time,
> Post2Forum@comcast.net writes:
> Then measure TP-11s from center to center. We can only hope it's 255 mm.
> I'm not sure what the calcs where for TP-11 and keeping it in place, maybe
> 1/8 is ok, but is sounds light.
> Thanks Steve. I truly appreciate the help!
>
> Brian Skelly
> Texas
> Europa # A276 TriGear
> See My build photos at:
> http://www.europaowners.org/BrianS
>
>
>
|