Hi Will,
It sounds risky. I know builders that have done it without the upper
skin but then you need to build up exactly same height in order to
"simulate" the skin, if you are using the template.
I did set the wing incidence before the uni reinforcing plies. The
template sits more accurate on the wing without uni.
Stephan
Will, and everyone
Don't forget the incidence of the wings is more critical outboard than it is at
the root.
Set it up on the port wing and let cure as described but then set up the second
wing to be identical incidence at the flap/aileron junction. This will help to
avoid any built in roll tendency
Graham
|