RE: Europa-List: Setting wing incidence

[William Daniell <wdaniell@etb.net.co>]

        FILETIME=[7CD21EA0:01C57281]


Graham thanks - so the idea is more one of the incidence being the same mid-
wing rather than a specific angle?

Will


-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Graham
Singleton
Subject: Europa-List: Setting wing incidence

<graham@gflight.f9.co.uk>

William Daniell" <wdaniell@etb.net.co>
Subject: RE: Europa-List: Setting wing incidence
        FILETIME=[BE207310:01C571C9]


Graham

Did (you) make another template for the position described?
Or how did you get the angle at this point?

Will

Will
 yes but a very basic one, a Vee on its side for the leading edge and a pad
to rest on the top surface at the trailing edge. The bit in between is not
so influencial in roll anyway,
The plans described root template is not particularly accurate either, it
doesn't show the reflex at the TE that the CAD coordinates show. I always go
for the maximum possible retraction of the flaps, slightly up if possible,
gives a better cruise
Graham