I did the same as Cliff, but replaced the factory supplied cable
sheaths with teflon lined. Seems like much lower friction. For the ends
of the sheath connecting to the carbs and throttle lever housing i used
fittings from Lockwood . I did not know that the factory fitting would
unscrew for reuse!..........Kevin
Kevin -
Cliff means that you have to get a professional connection for the inner
cable to the throttle end. The outer will screw into the other parts at each
end.
I shall be shortening my cables and lubricating with a special lube as
supplied for racing motorcycles. I am told that this is a good solution and
will
report back here as to what success I get.
Patrick
|