Yes I would be interested as I have not done mine yet .
Mono XS
ZK CHV
914 Airmaster
Rgds
Sue & Bill
Karl Heindl wrote:
>
>
> My original plan was to replace both TP5 and TP6 with a single tube.
> After removing the TP5 I realized that there was no point at all in
> removing the TP6. It is only necessary to ensure that it cannot move
> inboard, which would then allow the TP12 to disconnect from the
> tailplane etc. etc.
> I simply replaced the TP5 with a longer alu tube from ACS, part number
> 03-37900. This butts right up against the TP6, and there is no way
> this can ever move inboard. The tube is made of 6061 T6 aluminum.
> Advantages:
> A straightforward mod.
> No cutting into the tailplane.
> No misalignment problem with TP5 and TP6.
> A permanent solution. ( assuming that there was a problem in the first
> place.)
> If anyone is interested I can give more details on how I did it.
>
> Cheers,
>
> Karl
>
> _________________________________________________________________
> The next generation of Hotmail is here! http://www.newhotmail.co.uk
>
>
> __________ NOD32 2607 (20071022) Information __________
>
>
|