Ira,
>- - - - - - - the Rotax/VDO
> which is about 20F higher than the ring probes outside the block.
I do not have the Rotax/VDO probes into the block, only ring probes fitted
with a bolt into the original probe holes. I found that the ring probes in
flight were cooled considerably by the air flowing in under the cowling. I
smeared a generous amount of heat resistant (red) Loctite silicone sealant
all around the area. This appears to have effectively insulated the rign
probes from direct air cooling.
Regards,
Svein
LN-SKJ
|