Hi Jim,
I tossed the GRT supplied harness and used a pair of shielded cables.
I seem to recall that I used a 4 core and a two core. Any how I
grounded one end back to my central ground point, and for each cable I
used a small toroid. I was able to get an addition loop through each
one although it was tight.
My suggestion is that you try the same for your ELT wiring. I know
that you mentioned that you were already using toroids, but try an
extra loop through for each wire, and add a large one over the whole
cable. If that doesn't work, replace the 4 core flat telephone cable
with a 4 core shielded cable.
I have a bunch of toroids left, let me know if you would like me to
toss a few in the mail. BTW, I am using a Bob Archer antenna. It
isn't much better, lots of stuff goes nuts when I transmit.
Cheers, Paul
|