Just got hold of 3 very nice switches from McMaster Carr going to use for
gear down and locked switches.
Not cheap, but they are in a anodized aluminium housing, has wires potted
in place and a sealed actuation pin. Will use the stainless arm for the
outrigger set on a bias so arm can not get side loaded. For the main gear
lever will just let the lever arm push direct on the switch actuation pin.
http://www.europaowners.org/modules.php?set_albumName=album217&op=modload&name=gallery&file=index&include=view_album.php
Ron Parigoris
|