Fred=2C
The part is made by Colder Products Company (PC1701 and 1201 I believe) and
I stock them in sets as I go through them like water and use them many mor
e places. Some additional uses are: the manifold line=2C alternate static
sources=2C Dynon pitot tubes where I build them on to a panel for convenien
t access=2C altitude encoder for testing=2C etc.
Everybody should have a spare set and a spare static end for the pitot. Go
od insurance.
They are about $5.00 a set.
email me off line and I can get you some.
Bud
Custom Flight Creations (813) 653-4989
From: fklein@orcasonline.com
Subject: Re: Europa-List: pitot tube connectors
Date: Mon=2C 13 Apr 2009 19:31:13 -0700
On Apr 13=2C 2009=2C at 6:49 PM=2C Paul McAllister wrote:
I can't confirm that it is the correct part or not=2C but if it turns out t
hat it isn't then I think you can find what you need at McMaster Carr. Tak
e a look at:
http://www.mcmaster.com/#catalog/115/184/=1fnqwu
Also=2C when you get to plumbing up pitot static system I see that Stenair
have some really neat connector systems. See http://www.steinair.com/pitot
.htm
Thanks Paul...right on the money!
Fred
--
This message has been scanned for viruses and
dangerous content by MailScanner=2C and is
believed to be clean.
|