Stephan=0AIf I may say so, good Norwegian=C2-practicality=C2-and logic.
I congratulate you.=0AGraham=0A=0A=0A=0A________________________________
=0A From: SCASSEL <stephan@scassel.se>=0ATo: europa-list@matronics.com =0AS
ent: Wednesday, 17 October 2012, 9:14=0ASubject: Europa-List: Re: Mod 73 -
slightly different=0A =0A=0A Hi Will, =0A=C2-=0AOne washer on each bolt.
=0A=C2-=0AI guess there many different approaches and mine was probably n
ot the best but it made my day.=0A=C2-=0AThe washer was mounted on a wood
en stick (about 1/2=9D x 1/2") A slot was made that hold the washer o
n place.=0ATight. You have to press the washer into the slot.=C2-It was q
uite easy to put the washer on the bolt.=0A=C2-=0ASame stick (but the opp
osite side) was used in order to create a long handle to the spanner.=0AA m
ark was made on the stick so I know exactly how far in the tube I was. The
other hand on the bolt. =C2-=0AThe first tree were quite easy. On the fou
rth and last nut the washer went off and I had to rig the washer again.=0A(
A small swearing was fired)=0A=C2-=0A=C2-=0ABest regards=0AStephan =C2
===================
|