Stephan
Thanks for the idea. I shall do something very similar I think except
mine will be easier because I still have the top off. Less swearing.
Will
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of SCASSEL
Sent: 17 October 2012 03:15
Subject: Europa-List: Re: Mod 73 - slightly different
Hi Will,
One washer on each bolt.
I guess there many different approaches and mine was probably not the
best but it made my day.
The washer was mounted on a wooden stick (about 1/2=9D x 1/2") A
slot was made that hold the washer on place.
Tight. You have to press the washer into the slot. It was quite easy to
put the washer on the bolt.
Same stick (but the opposite side) was used in order to create a long
handle to the spanner.
A mark was made on the stick so I know exactly how far in the tube I
was. The other hand on the bolt.
The first tree were quite easy. On the fourth and last nut the washer
went off and I had to rig the washer again.
( A small swearing was fired)
Best regards
Stephan
LN-STE Mono
|