Hi Max,
Rather than 2 green door lights continually on, my intention is to have a s
ingle circuit through both shoot bolt switches, and if either isn't closed, t
he door and the circuit, a red light stays on, or inflight comes on. That wa
y, my panel has no lights unless something is wrong.
Tony R.
Sent from my iPad
> On 3 Oct 2014, at 2:31 am, Fred Klein <fklein@orcasonline.com> wrote:
>
>
> On Oct 2, 2014, at 6:44 AM, Max Cointe (Free) <mcointe@free.fr> wrote:
>
>>> but if you want some cheap insurance too put a switch on each of the rea
r
>> shoot bolts that puts a ground on a bright red LED directly in front of y
ou
>> on the panel...
>> And then install a test button to verify that the leds are still alive.
>> Complicate cabling AND checklist.
>
> With thanks to Raimo Toivio for the design and components, I have mounted t
wo robust pressure switches which will give me two lit green LEDs on the pan
el when the rear shoot bolts for the two doors are engagedno need f
or test button to ensure system is operationalreally quite simple
I=99ve also fabbed tabs on both doors which are located so that p
ilot can reach to ensure firm closure w/o relying on passengernonet
heless: Checklists Rule !!
>
>
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>
|