Hi Steve!
I also endorse Bob's treatise which you can download from his aeroelectric site.
Bob's "forest of tabs" is a convenient way to tie all of your panel
grounds together with minimal resistance. The tab field can conveniently
be bolted to the bottom of your panel molding. You will probably need
above 50 tab points for all the panel grounds. From the ground tabs
reserve two or three tabs for #8 or 10 ga wires to an amphenol
connector through the firewall. On the other side of the firewall a 1/4" bolt
is convenient to attach ring crimp connectors to the battery and to the
engine block.
--------
Ira N224XS
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=432528#432528
|