I used the Skydrive coolant temp kit, repositioning one of the 2 fitted CHT
senders
for use in the M10 threaded tube. The CHT sockets on my 912S are blind,
so I could remove one without creating a leak - check yours, or just buy an
additional
sender for use in the coolant kit!
I have the carb heat kit, so needed the Adapter 3 (sort of double T piece - see
picture) to take off both the carb heat and the temp probe.
http://www.skydrive.co.uk/products.asp?cat=67
It makes sense when you see the parts. Holler if it's not clear, although Mark
(Mick?) at Skydrive is v helpful and will talk you through the options.
HTH
Paul M 383
XS Mono 912S
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=456307#456307
Attachments:
http://forums.matronics.com//files/adapter_3__new_large_197.jpg
|
