Depending upon where the large capacitor is, yes, it could spike like that of it
was discharged.
> On Oct 6, 2017, at 11:52 AM, William Daniell <wdaniell.longport@gmail.com>
> wrote:
>
> I have a dynon skyview and the ammeter reads off the shunt per dynon manual.
My electrical system is standard europa without deviation and i have a rotax
912
>
> The last time a flew when i started the engine had a red x over the ammeter
> (ie
not working) where it had worked on the previous flight.
>
> I pulled the alt 30A cb which reset the "instrument" and thereafter it read
> normally.
I left the 30A battery cb set during this process.
>
> My question: When I pulled the cb the amp reading, once it came alive, spiked
up to 60A. I immediately reset the cb and everything settled back down to its
normal readings.
>
> Is this spike normal?
>
> Thanks
>
> Will
|