Pete
thanks. Is this a problem/potential problem? Or is this a short term
event?
Will
William Daniell
LONGPORT
+57 310 295 0744
On Fri, Oct 6, 2017 at 2:31 PM, Pete <peterz@zutrasoft.com> wrote:
>
> Depending upon where the large capacitor is, yes, it could spike like that
> of it was discharged.
>
> > On Oct 6, 2017, at 11:52 AM, William Daniell <
> wdaniell.longport@gmail.com> wrote:
> >
> > I have a dynon skyview and the ammeter reads off the shunt per dynon
> manual. My electrical system is standard europa without deviation and i
> have a rotax 912
> >
> > The last time a flew when i started the engine had a red x over the
> ammeter (ie not working) where it had worked on the previous flight.
> >
> > I pulled the alt 30A cb which reset the "instrument" and thereafter it
> read normally. I left the 30A battery cb set during this process.
> >
> > My question: When I pulled the cb the amp reading, once it came alive,
> spiked up to 60A. I immediately reset the cb and everything settled back
> down to its normal readings.
> >
> > Is this spike normal?
> >
> > Thanks
> >
> > Will
>
>
|