Re: Flap Setting Template

[Fred Fillinger <fillinger@ameritech.net>]

Mike Gamble wrote:

> Incidentally I used a flexible drive on my B&D (which was itself mounted on
> a block of wood) to drill the holes in W18's etc. This allowed me to drill
> horizontally as close as 1/2" to the wing surface.
>  Mike
>  XS Mono - 440

Also, a 12" inch drill bit flexes enough for the task, after starting
a hole with a smaller bit.  Hold it with an oily rag at mid-point;
don't forget the safety glasses....

Regards,
Fred F., A063