europa-list (date)
October 31, 2001
- Crawling in th back......, Paul Stewart, 22:56
- RE: Junkyard Wars 10/31 on TLC, Peter Zutrauen, 22:04
- Europa, spotted this afternoon at Popham, Paul Sweeting, 18:08
- Technique for locating Mono Landing Gear mounting frame, clevelee, 14:50
- List Support Site, John Cliff, 14:46
- Europa Club Christmas Dinner, Rowland & Wilma Carson, 13:51
- Re: RED STRIPPED EUROPA, KarkelB, 13:32
- Re: Fuel system changes, John Cliff, 12:16
October 30, 2001
- Re: Getting one's feet wet..., Fred Fillinger, 15:46
- DITCHING A EUROPA, Runnymede73, 13:00
- Re: Getting one's feet wet..., J . Dutch Revenboer, 11:30
- Re: Getting one's feet wet..., Tom & Cathy Friedland, 09:20
- Re: Getting one's feet wet..., Fred Fillinger, 08:34
- Junkyard Wars 10/31 on TLC, Fred Fillinger, 08:27
October 29, 2001
- RE: Fuel system changes, Bob Harrison, 23:39
- Flying a monowheel., Ron Jones, 23:37
- Re: Fuel system changes, John Cliff, 18:33
- Getting one's feet wet..., Paul Sweeting, 17:38
- Re: Fuel system changes, Rob Housman, 15:52
- Re: Fuel system changes, Tom & Cathy Friedland, 14:09
- Re: Fuel system changes, Graham Singleton, 13:13
- RE: Fuel system changes, Bob Harrison, 11:14
- Re: Fuel system changes, LTS, 10:31
- Re: Fuel system changes, Fred Fillinger, 09:13
- Re: Fuel system changes, Barrington Tennant, 09:12
- RE: Fuel system changes, Bob Harrison, 09:01
- RE: Crawling in back of the fuselage, Tony S . Krzyzewski, 08:38
October 27, 2001
- Re: Capacitance fuel gauge installation, Nobody, 23:00
- Tailplane Tab Setting, MJKTuck, 22:01
- Re: Fuel system changes, Fred Fillinger, 20:57
- RE: interior pictures, Bob Harrison, 20:43
- Re: Fuel system changes, Klaus Dietrich, 18:39
- interior fitting/seats, Jacqui, 17:04
- Re: Fuel system changes, tonyk, 15:49
- Re: Fuel system changes, tonyk, 14:43
- interior pictures, Rob Van essen, 14:19
- Re: Fuel system changes, tonyk, 08:22
- Re: First flight, tonyk, 08:16
- Re: First flight, Nigel Charles, 03:37
- RE: First flight, Nigel Charles, 03:37
October 26, 2001
- Re: Fuel system changes, Tom & Cathy Friedland, 21:43
- Re: Fuel system changes, Fred Fillinger, 21:23
- Long Battery leads., Bob Harrison, 20:48
- RE: Fuel system changes, Peter Zutrauen, 20:31
- Re: Fuel system changes, Fred Fillinger, 19:47
- Re: Fuel system changes, Fred Fillinger, 19:41
- Re: Fuel system changes, Paul Stewart, 19:18
- Re: Fuel system changes, Tom & Cathy Friedland, 19:17
- Re: Gascolators, David Corbett, 19:14
- Re: Fuel system changes, Klaus Dietrich, 18:05
- Re: Fuel system changes, Fred Fillinger, 13:58
- Re: First flight, Ron Jones, 13:35
- Re: Thank you!, Ira Rampil, 12:59
- Re: Heating the shop, John Cliff, 12:11
- Re: Heating the shop, John Cliff, 12:09
- Re: Fuel system changes, Craig M Ellison, 11:47
- Re: Fuel system changes, Carl Pattinson, 09:25
- RE: Fuel system changes, Nick Hammond, 08:56
October 25, 2001
- Re: Gascolators, Tim Ward, 22:22
- RE: Heating the shop, Bill & Sue, 20:28
- RE: Gascolators, Bob Harrison, 20:00
- RE: Gascolators, Bob Harrison, 20:00
- Re: Gascolators, Graham Singleton, 18:47
- RE: Plug-In Panel, tonyk, 18:43
- Fuel system changes, DJA727, 17:12
- Thank you!, svein johnsen, 17:04
- Re: First flight, BRYNALL, 16:22
- RE: First flight, Bob Harrison, 16:16
- RE: Plug-In Panel, Tony S . Krzyzewski, 14:12
- RE: First flight, Kesterton Donald, 13:50
- RE: Plug-In Panel, Graham Singleton, 13:50
- First flight, Ron Jones, 13:17
- RE: Plug-In Panel, Nick Hammond, 13:04
- Re: Plug-In Panel, Fred Fillinger, 10:57
- Re: Plug-In Panel, Fred Fillinger, 10:55
- Re: First flight, Terry Seaver, 09:20
- Re: Gascolators, Tom & Cathy Friedland, 08:21
- Re: Gascolators, Bob Jacobsen, 07:42
- Bits for sale!, Gerry Holland, 06:32
- Re: Plug-In Panel, DaveBuzz, 03:56
October 24, 2001
- Gascolators, Graham Singleton, 23:27
- Re: Strut/tie-bar fitting nightmare!!!, Tim Ward, 22:23
- Re: Heating the shop, ami mcfadyean, 20:12
- Plug-In Panel, svein johnsen, 17:53
- Re: Heating the shop, Nigel Graham, 12:13
- Re: Strut/tie-bar fitting nightmare!!!, bizzarro, 10:47
- RE: Heating the shop, Nigel Charles, 10:39
- Re: Strut/tie-bar fitting nightmare!!!, Paul & Liz Atkinson, 10:32
- RE: Heating the shop, John Cliff, 10:32
- Strut/tie-bar fitting nightmare!!!, bizzarro, 07:15
October 23, 2001
- RE: Fuel tank installation, david . hillam, 23:00
- Classic Exhaust Stubs, ami mcfadyean, 22:43
- RE: Fuel tank installation, Nick Hammond, 21:59
- RE: The Solid-State Gyro PDA, Tony S . Krzyzewski, 12:56
- RE: Fuel tank installation, Bob Harrison, 12:51
- Re: Fuel tank installation, Carl Pattinson, 10:34
- Fuel tank installation, DJA727, 01:19
October 22, 2001
- Re: Extra height and width in the cockpit coming soon....., Freeserve, 16:32
- Re: Heating the shop, John Cliff, 11:21
- Spare tail wheel, John Cliff, 11:18
- RE: The Solid-State Gyro PDA, Nick Hammond, 09:12
- RE: Extra height and width in the cockpit coming soo, Peter Zutrauen, 08:25
- RE: The Solid-State Gyro PDA, tonyk, 08:15
- Re: The Solid-State Gyro PDA, Tom & Cathy Friedland, 06:41
- Extra height and width in the cockpit coming soon....., KarkelB, 06:39
October 21, 2001
- Re: The Solid-State Gyro PDA, Fred Fillinger, 22:55
- Re: The Solid-State Gyro PDA, Fred Fillinger, 22:52
- Re: The Solid-State Gyro PDA, tonyk, 18:43
- Re: The Solid-State Gyro PDA, Shaun Simpkins, 18:41
- Re: The Solid-State Gyro PDA, ScramIt, 18:27
- Re: The Solid-State Gyro PDA, Tom & Cathy Friedland, 15:39
- Re: The Solid-State Gyro PDA, Fred Fillinger, 15:14
- Re: The Solid-State Gyro PDA, Shaun Simpkins, 13:18
- Re: The Solid-State Gyro PDA, Fred Fillinger, 11:13
- Re: The Solid-State Gyro PDA, Shaun Simpkins, 09:03
- Re: The Solid-State Gyro PDA, Shaun Simpkins, 09:02
October 20, 2001
- Re: Heating the shop with metal parts coating!, JW, 19:53
- RE: Heating the shop, Bill & Sue, 15:10
- RE: The Solid-State Gyro PDA, Kevin Klinefelter, 12:22
- Re: Metal parts., Miles McCallum, 12:03
- Re: Fuel system, John Cliff, 12:01
- Re: Heating the shop, Rowland & Wilma Carson, 11:15
- Re: Fuel system, Graham Singleton, 11:09
- Re: Metal parts., Craig M Ellison, 10:55
- Re: Metal parts., Fred Fillinger, 08:57
- Re: Metal parts., tonyk, 08:00
- Re: Heating the shop, tonyk, 07:40
- Re: Fuel system, tonyk, 07:34
- Re: The Solid-State Gyro PDA, Shaun Simpkins, 07:34
- The Solid-State Gyro PDA, ScramIt, 06:03
- Heating the shop with metal parts coating!, ScramIt, 05:50
October 19, 2001
- Re: Fuel system, tonyk, 20:49
- Re: Metal parts., tonyk, 20:19
- Re: Metal parts., Robert Berube, 18:09
- Re: Metal parts., LTS, 18:09
- Fw: Heating the shop, John Eckel, 17:50
- RE: Heating the shop, Peter Zutrauen, 16:52
- Re: Heating the shop, Chris Beck, 16:47
- RE: Metal parts., Nick Hammond, 16:44
- Europa for Sale, Bill Stewart, 14:58
- Fuel system, tonyk, 13:17
- Heating the shop, John Eckel, 12:15
- RE: Heating the shop, Cliff Shaw, 11:25
- Re: Metal parts., Fred Fillinger, 10:44
- Re: Fuel system, David Corbett, 08:29
- Re: Metal parts., Peter van Schoonhoven, 05:33
- Metal parts., DJA727, 02:18
October 18, 2001
- Re: Drilling holes close to surface, Craig M Ellison, 23:16
- RE: Tying down a Trigear, Tony S . Krzyzewski, 08:56
- RE: First real question, Tony S . Krzyzewski, 08:52
- Re: Capacitance fuel gauge installation, david joyce, 08:09
- Re: First real question, Graham Singleton, 01:02
October 17, 2001
- Re: Tying down a Trigear, Fred Fillinger, 22:40
- Re: Flap Setting Template, Fred Fillinger, 22:37
- Re: Tying down a Trigear, Geoffrey Leedham, 22:09
- RE: Tying down a Trigear, Bob Harrison, 20:45
- Re: Re: Europa Mail: First real question, Graham Singleton, 18:31
- Re: First real question, Graham Singleton, 18:29
- RE: Metal parts., Kevin Klinefelter, 17:25
- Re: First real question, Fred Fillinger, 14:49
- RE: First real question, Tony S . Krzyzewski, 11:48
- Re: Tying down a Trigear, LTS, 11:27
- Re: Drilling holes close to surface, John Cliff, 10:58
- Re: Europa Mail: First real question, John Cliff, 10:46
- Re: First real question, Fred Fillinger, 10:01
- Re: Tying down a Trigear, Fred Fillinger, 10:00
- Re: First real question, Paul Boulet, 09:47
- Tying down a Trigear, David Cripps, 08:46
- Re: First real question, Carl Pattinson, 07:59
October 16, 2001
- RE: First real question, Steve Hagar, 20:41
- Re: Flap Setting Template, Graham Singleton, 18:49
- First real question, DJA727, 18:32
- RE: Port Skins, Tony S . Krzyzewski, 16:59
- Tony Krzyzewski's "skins", Fergus Kyle, 10:01
- from Flyer news....!!!!!, Miles McCallum, 09:39
- Forced landing..., Strike Edward ANTS, 09:14
- Re: Port Skins, ScramIt, 08:56
- Re: Flap Setting Template, Graham Singleton, 00:49
- Re: Port Wing Skins, Carl Pattinson, 00:34
October 15, 2001
- Re: Drilling holes close to surface, JW, 22:37
- Capacitance fuel gauge installation, Frank Mycroft, 22:19
- Re: Port Skins, Dave DeFord, 21:39
- Re: Flap Setting Template, Fred Fillinger, 20:59
- Port Skins, JW, 19:43
- Re: Flap Setting Template, Mike Gamble, 17:55
- RE: Microair transponder, Nick Hammond, 17:02
- Re: Flap Setting Template, Fred Fillinger, 15:36
- Re: Flap Setting Template, Fred Fillinger, 15:34
- Drilling holes close to surface, Fergus Kyle, 14:09
- Re: Flap Setting Template, Miles McCallum, 10:56
- Europa Aircraft and K.P. Aviation is alive and well...and getting, Kim Prout, 10:23
October 13, 2001
- Fw: Flap Setting Template, John Eckel, 21:21
- Re: Microair transponder, Tony Krzyzewski, 16:51
- RE: Microair transponder, Nick Hammond, 13:31
- Flap Setting Template, Nick Hammond, 13:18
- Re: Flap Setting Template, Fred Fillinger, 11:06
- Re: Microair transponder, Fred Fillinger, 10:59
- Re: Microair transponder, Tony Krzyzewski, 10:32
October 11, 2001
- Re: Microair transponder, ami mcfadyean, 23:34
- ICOM IC-A200 VHF Transceiver, Nick Hammond, 19:17
- Re: FAR-65-E, Fred Fillinger, 17:25
- Re: ICOM IC-A200 VHF Transceiver, Fred Fillinger, 09:55
- Re: FAR-65-E, Brian Rauchfuss - PCD, 09:01
October 10, 2001
- Re: Fuel smell in cockpit, David Corbett, 18:49
- Re: Fuel smell in cockpit, David Corbett, 18:45
- Microair transponder, Tony S . Krzyzewski, 12:01
- Re: FAR-65-E, Brian Rauchfuss - PCD, 11:24
- RE: Fuel smell in cockpit, Graham Singleton, 09:23
- RE: Fuel smell in cockpit, Mark Chetwynd-Talbot, 09:14
- Re: FAR-65-E, Fred Fillinger, 08:59
- Fuselage Dolly, Edward Gladstone, 06:49
- Undercarriage Lever Mod - WEB Site Now Live !!, Edward Gladstone, 06:43
- Re: Fuel smell in cockpit, Graham Singleton, 01:19
October 09, 2001
- XS monowheel dolly, Mike Gamble, 20:33
- Re: Electrical bonding of fuel system components, David Corbett, 18:49
- Fuel smell in cockpit, David Corbett, 18:41
- Re: Electrical bonding of fuel system components, Tony Krzyzewski, 17:48
- fires [was: Re: Capacitance fuel level sending unit.], Rowland & Wilma Carson, 17:40
- Port Wing Skins, Kevin Klinefelter, 16:26
- FAR-65-E, Nic, 15:09
- Conventional Taildragger Europa for Sale, Nigel Charles, 14:45
- Electrical bonding of fuel system components, Nick Hammond, 13:15
- Re: Electrical bonding of fuel system components, Graham Singleton, 10:48
October 08, 2001
- For South of England builders, Garry Copeland, 23:33
- Mounting capacitance fuel gauge, Frank Mycroft, 19:35
- XS port wing closure panel, John Cliff, 15:04
- Re: Thinner for Duralac, John Cliff, 14:59
- Re: Viton seals, Nigel Graham, 10:34
- Re: Araldite 420, Ira Rampil, 10:22
- Re: Capacitance fuel level sending unit., Graham Singleton, 09:02
- RE: Fwd: Re: Fw: XS-KIT # A095 FOR SALE, Tony S . Krzyzewski, 08:47
- Thinner for Duralac, Alfred Buess, 08:11
- RE: Capacitance fuel level sending unit., Jim Thursby, 07:24
October 07, 2001
- Re: Capacitance fuel level sending unit., Rowland & Wilma Carson, 21:46
- Re: Fwd: Re: Fw: XS-KIT # A095 FOR SALE, Edward van de Beek, 21:43
- Re: Fwd: Re: Fw: XS-KIT # A095 FOR SALE, Steve & Eileen Genotte, 19:50
- Araldite 420, Paul McAllister, 13:44
- RE: Araldite 420, Rob Housman, 13:28
October 05, 2001
- Re: Viton seals, ami mcfadyean, 21:15
- Re: Capacitance fuel level sending unit., ptag . dev, 21:14
- Re: Capacitance fuel level sending unit., Nigel Charles, 19:44
- Re: Capacitance fuel level sending unit., bizzarro, 15:57
- Re: Airmaster VP Propellor, Klaus Dietrich, 12:07
- Re: Fwd: Re: Fw: XS-KIT # A095 FOR SALE, Fred Fillinger, 10:28
- Re: Viton seals, Nigel Graham, 09:50
- RE: Airmaster VP Propellor, Tony S . Krzyzewski, 09:42
- Re: Airmaster VP Propellor, Garry Stout, 08:08
October 04, 2001
- Re: Viton seals, ami mcfadyean, 21:38
- Capacitance fuel level sending unit., Steve Hagar, 21:15
- Re: Fwd: Re: Fw: XS-KIT # A095 FOR SALE, Steve & Eileen Genotte, 18:18
- Fwd: Re: Fw: XS-KIT # A095 FOR SALE, DuaneFamly, 17:50
- Fw: XS-KIT # A095 FOR SALE, Olaf Asmis, 11:57
- Re: Europa Company Sold, Shaun Simpkins, 07:37
- Re: Fitting up the pre moulded root fairings, Graham Singleton, 00:08
October 03, 2001
- Re: Airmaster VP Propellor, Bob Jacobsen, 21:54
- Viton seals, Nigel Graham, 20:22
- Re: French for Pilots, John Cliff, 16:15
- Airmaster VP Propellor, ErichGabbe, 12:55
- Re: Liberty, Graham Singleton, 12:09
- Flight Crafters is ready to serve you, RLaviation, 09:39
- Re: Announcement, Goldyfire, 04:05
October 02, 2001
- Europa Company Sold, Paul McAllister, 20:11
- Announcement, Europa Aircraft, 18:33
- Re: Use of White Pigment with Ampreg 20, J R \Bob\ Gowing, 16:25
- Re: Use of White Pigment with Ampreg 20, Rob Housman, 15:46
- RE: Europa Company Sold, Peter Zutrauen, 15:35
- Re: Europa Company Sold, Augustene Brown, 14:49
- Re: Europa Company Sold, Peter van Schoonhoven, 11:34
- Fwd: Europa Company Sold, Lyle Antieau, 10:15
- Re: Fitting up the pre moulded root fairings, Miles McCallum, 08:48
- Europa Company Sold, Garry Stout, 08:42
- cramp for navaids autopilot, Nigel Charles, 05:44
October 01, 2001
- Re: Use of White Pigment with Ampreg 20, ami mcfadyean, 21:29
- Fitting up the pre moulded root fairings, Paul McAllister, 21:04
- Re: Use of White Pigment with Ampreg 20, LTS, 19:28
- Re: Engine selection., Augustene Brown, 18:02
- Climb rate, engine performance, Terry Seaver, 15:00
- Re: Use of White Pigment with Ampreg 20, Rob Housman, 12:33
- EFIS/One, John Cliff, 12:26
- AoA INSTRUMENTS, Fergus Kyle, 10:45