>While planning my avionics stack I discovered that there is not sufficient
>depth behind the panel for any UPS Aviation Technologies nav/comm,
GPS/comm,
>or transponder. Each of these requires approximately inch (12 mm) more
>than is available behind the panel to the firewall. Not wanting to make
>unnecessary cuts into the firewall for clearance my remedy is to add a
>spacer between the panel flange and the firewall. According to Neville
this
>is OK as long as the relocated panel does not interfere with full forward
>stick motion.
Another alternative might be to let the avionics stick out the front by 1/2
inch and make a nice wooden bevel to fit round them.
Cheers,
Mark.
________________________________
Mark Jackson - +44 (0)7050 645590
europa-builder@ntlworld.com
http://harley.pcl.ox.ac.uk/~mark/Europa
|