To all,
I agree with Pete. I have used a Dynon D10A in my panel since 2003 and I
have found it to be satisfactory after some some significant initial
problems. However, as Pete mentions, Dynon has a strange algorithm to
provide data to the horizon and if there is a problem with the pitot /
static input or if there is an internal leak, the indication will be
incorrect. (Been there done that - it is very strange to be flying
straight and level VFR and the D10A horizon oscillates up and down or
does a slow bank.)
If I was doing the panel again, I would use a Grand Rapids Mini-B,
Mini-X or Mini-AP EFIS.
http://grtavionics.com/home/efis-systems/mini-series-efis/ My experience
is that Grand Rapids makes rock solid equipment.
Cheers, John
N262WF, mono XS, 912S, 1,000 hours
Europa-List: Re: Dynon rebooted twice in flight FWIW, I wouldn't fly
dynon IFR - lose pitot and you lose attitude too. Cheers and blue skies,
Pete A239/
|