carlp101 wrote:
> Hi James,
>
> I fitted the Dynon heated probe that is also an AoA probe, but you need it to
feed a Dynon ADHRS unit. The AoA gauge is displayed in the main Dynon SkyView
panel.
>
> Regards
> Carl
Hi James,
When Carl fitted his Dynon heated probe, he kindly gave me his original AOA
probe,
which I think he fabricated himself by slipping a slightly wider aluminium
pipe over the original probe, and chamfering the front end to match the angle
required for an AOA probe. I fitted this to the inspection panel on the
starboard
wing, after replacing the acrylic cover with a metal cover, and used this
for my Dyson Skyview AOA gauge, and it works well. Fortunately, I had some
unnecessary
wiring running through the wing which I used to feed through the necessary
tubing. I have attached a couple of photos.
However, I also fitted a SmartAss device after reading the article in the June
2014 LAA Magazine by David Joyce, and I must say I find the audio prompting from
this great, and would thoroughly recommend it, to augment the AOA function.
Hope this helps.
--------
Bob Dawson
Europa XS TG || 912 ULS || G-NHRJ || Dynon Skyview || PilotAware || SmartAss3
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=492026#492026
Attachments:
http://forums.matronics.com//files/14727_7_208.jpg
http://forums.matronics.com//files/14727_6_172.jpg
http://forums.matronics.com//files/14727_5_208.jpg
|
