Another vote in favour of audio warnings which are hard to ignore and do not
interrupt
an already busy visual scan on final approach.
I regularly fly another taildragger with Dynon AoA & audio warnings - a bit like
parking sensors theres a beeping tone which becomes faster as you approach the
stall - fantastic.
My Europa has the Smartass which is also good.
On balance I prefer the AoA since the stall is directly related to AoA & correct
approach speed IAS changes according to A/C weight.
Some good AoA landing videos on youtube.
Regards,
Roger
> On 29 Oct 2019, at 19:52, BobD <rjd@bobdawson.plus.com> wrote:
>
>
>
> carlp101 wrote:
>> Hi James,
>>
>> I fitted the Dynon heated probe that is also an AoA probe, but you need it to
feed a Dynon ADHRS unit. The AoA gauge is displayed in the main Dynon SkyView
panel.
>>
>> Regards
>> Carl
>
>
> Hi James,
> When Carl fitted his Dynon heated probe, he kindly gave me his original AOA
> probe,
which I think he fabricated himself by slipping a slightly wider aluminium
pipe over the original probe, and chamfering the front end to match the angle
required for an AOA probe. I fitted this to the inspection panel on the
starboard
wing, after replacing the acrylic cover with a metal cover, and used this
for my Dyson Skyview AOA gauge, and it works well. Fortunately, I had some
unnecessary wiring running through the wing which I used to feed through the
necessary
tubing. I have attached a couple of photos.
>
> However, I also fitted a SmartAss device after reading the article in the June
2014 LAA Magazine by David Joyce, and I must say I find the audio prompting
---From this great, and would thoroughly recommend it, to augment the AOA
function.
>
> Hope this helps.
>
> --------
> Bob Dawson
> Europa XS TG || 912 ULS || G-NHRJ || Dynon Skyview || PilotAware || SmartAss3
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=492026#492026
>
>
>
>
> Attachments:
>
> http://forums.matronics.com//files/14727_7_208.jpg
> http://forums.matronics.com//files/14727_6_172.jpg
> http://forums.matronics.com//files/14727_5_208.jpg
>
>
>
>
>
>
|