Patrick,
I had the same problem with my Rotax 914, I cured it by replacing the cables
with
solid wire which I had made, any cable manufacturer can do this.
Regards Jack PH-JGW
-----Oorspronkelijk bericht-----
Van: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]Namens BEBERRY@aol.com
Verzonden: donderdag 20 oktober 2005 23:31
Aan: europa-list@matronics.com
Onderwerp: Europa-List: Throttle Cables.
Having just fitted two new (massively expensive) throttle cables to cure the
apparent problem of 'stiction', I find that nothing has changed,
Despite being meticulously careful in the fitting (no kinks etc) and
following the build manual instructions, I cannot find a way to get the
throttle
cables to operate properly i.e. the throttle will not open when the lever is
moved forward as the throttle lever spring does not overcome the friction
between inner and outer.
Any suggestions for a solution (stronger springs, oil??) would be welcomed.
Patrick
|