Thanks Brian, I'll try the Tandy suggestion.
The Mag. switches are grounded and shielded but no shielding on the ignition
generators or plug leads.
Regards
Bob H G-PTAG Europa/Jabiru 3300
> -----Original Message-----
> From: owner-europa@aztec.houxou.com
> Cc: Roger.Mills@btinternet.com; MJKTuck@cs.com; terrys@cisco.com;
> Europa@avnet.co.uk
> Subject: Re: Re: Fuel leak/smell.
>
>
> > Hi! Roger.
> > Just "happened" on your message! Do you think that this foil
> type tape would
> > shield my radio from Mag. and plug lead interference if stuck all over
> > engine side of the firewall? ( I already have a sheet of
> aluminium on the
> > back of the firewall behind the radio stack and panel.) I'm
> just beginning
> > to despair over what appears to be mag. interference on my ICOM
> A200 with
> > auto squelch
> > cutting the receive signal. Sorry to change the train of thought!
> > Regards
> > Bob Harrison G-PTAG
>
> The interference may be getting in via the power leads. I
> believe that Radio
> Shack / Tandy has a filter for cars which should help. Even
> better would be
> figuring out how the noise is getting out! Are the mag lines shielded
> everywhere?
>
> Brian
>
>
|