Re: Baggage bay bulkhead to fuselage

[Graham Singleton <grasingleton@avnet.co.uk>]

 <01fc01c290a0$0e1c54a0$d79e2fc3@default>

>I used Mike Costin's suggestion (and mould tool) to make a simple top hat
>section beam of kevlar/carbon tape on the top of the hat and two plies of
>bid down the sides.  Weighed around 80 grams and when bonded to the back of
>the bagage bay cutout, stiffened it immensely.
>Dave Simpson

Another of Mike's good ideas. It probably helps to reduce the drumming/ 
noise too.
Graham